Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Luran® SAN W - SAN - INEOS Styrolution

Material Data Center offers the following functions for Luran® SAN W:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Luran S datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Caracteristicas de procesamiento y fisicas - Propiedades mecánicas - Propiedades térmicas - Propiedades opticas - Otras propiedades
Any use of this information falls under the rules of our disclaimer.
Caracteristicas de procesamiento y fisicasValorUnidadesMétodo de ensayo
ISO Data
Indice de fluidez volumétrico, MVR 60 cm³/10min ISO 1133
Temperatura 220 °C -
Carga 10 kg -
Contracción posterior al moldeo, normal 0.3 % ISO 294-4, 2577
Propiedades mecánicasValorUnidadesMétodo de ensayo
ISO Data
Módulo de tracción 3600 MPa ISO 527
Alargamiento a rotura 2.1 % ISO 527
Módulo de flexión, 23°C 3600 MPa ISO 178
Resistencia a la flexión 115 MPa ISO 178
Resistencia al impacto Izod con entalla, +23°C 1.8 kJ/m² ISO 180/1A
Dureza Rockwell R 124 - ISO 2039-2
Propiedades térmicasValorUnidadesMétodo de ensayo
ISO Data
Estabilidad al calor, 1.80 MPa 90[ann.] °C ISO 75-1/-2
Estabilidad al calor, 0.45 MPa 95[ann.] °C ISO 75-1/-2
ASTM Data
Temperatura Vicat 101 °C ASTM D 1525
ann.: annealed
Propiedades opticasValorUnidadesMétodo de ensayo
ASTM Data
Transmitancia luminosa 89.5 % ASTM D 1003
Otras propiedadesValorUnidadesMétodo de ensayo
Densidad 1070 kg/m³ ISO 1183
Bulk density 600 kg/m³ -
Características
Forma de suministro
Sémola
Características especiales
Transparente
Certifications
Contacto con alimentos
Applicaciones
Empacado
Disponibilidad regional
Asia Pacifico
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.